IP CCTV Accessories

Showing all 14 results

  • 11X Series – Ethernet 2 Wi-Fi adapter

    0 out of 5

    Enjoy the freedom of Wi-Fi connectivity for any of your wired Ethernet devices

    • Convert any device from Ethernet to Wi-Fi
    • Turn Intercoms, Paging Speakers, CCTV cameras into High Speed Wi-Fi Enabled Devices
    • Secured Wi-Fi Network with encryption
    • Maximize Transfer Speed to 1200Mbps with 5G band
    • Transmission distance 100 mtrs without obstacle, 500 mtrs for enhanced version.
    • WiFi intelligent bridge function – wireless to wired, wired to wireless intelligent switching

    Ethernet to Wi-Fi converter is available in 2.4G, 2.4G + 5G or enhanced 500 mtr version, Please contact us for pricing.

     

    Enjoy the freedom of Wi-Fi connectivity for any of your wired Ethernet devices Convert any device
    Quick View
  • 2N

    2N 9159014 – Ethernet to 2 wire converter / adaptor

    0 out of 5

    The 2N® 2Wire convertor allows you to use existing two-wire or coaxial cabling from your original door bell or door intercom to connect any IP equipment.

    No configuration is required, and you only need one 2N® 2Wire unit at each end of the cable, where at least one of them is connected to a power source. The 2N® 2Wire unit then provides PoE power not only to the second converter, but also to all other connected IP equipment.

    • Utilisation of existing infrastructure
    • Single cable for power and data transfer
    • Power for connected IP devices over PoE up to a range of 220m
    • Simple, fast installation
    • Robust Aluminum houing
    • High reliability

     

    The 2N® 2Wire convertor allows you to use existing two-wire or coaxial cabling from your original door
    Quick View
  • AC/DC Power Supply Adapter

    0 out of 5
    • Input 100-240V AC
    • Output 12V DC  1000mA
    • Regulated output voltage for Intercoms, Phones, Speakers, CCTV etc.

     

    Input 100-240V AC Output 12V DC  1000mA Regulated output voltage for Intercoms, Phones, Speakers
    Quick View
  • Doorbird

    DOORBIRD ETHERNET TO 2 WIRE CONVERTER

    0 out of 5

    The Doorbird 2 wire converter will convert your Ethernets POE signal to be used with a 2 wire system, such as an existing door chime wiring, and convert it back again to allow connection to your Doorbird Intercom.

    Have trouble running a cat 5e or 6 cable to your intercom? Dont have a Wifi signal reliable enough at the Intercom installation location? No problem, utilise your existing electric strike or doorbell wiring to both power and transmit data to your intercom.

    The Converter supports both af and at modes of POE, allowing up to 30w to be used to power all matter of devices, such as cameras and intercoms.

    Note: POE injector/switch is not included or part of this product.

    The Doorbird 2 wire converter will convert your Ethernets POE signal to be used with a 2 wire system, s
    Quick View
  • IP to 2Wire Converter Kit

    0 out of 5
    • Transmit IP signals over standard 2-core or coaxial cable
    • Integrate IP devices (such as IP cameras, IP intercom, etc) into an existing non-LAN cable infrastructure
    • Transmits data and power over single cable
    • Supplies power for connected IP devices via PoE
    • Simple, fast installation
    • Low cost device, cost saving on cable installation

     

    Transmit IP signals over standard 2-core or coaxial cable Integrate IP devices (such as IP cameras,
    Quick View
  • Milesight

    Milesight A62 / A63 Junction box for Bullet Cameras

    0 out of 5

    A62 Junction Box

    Weight: 510g

    Dimension: 134*127*40mm

    Installation Environment: For the containing of electrical connections which need to be concealed from sight and deter tampering

    Applicable Model: Pro Bullet, Mini PTZ Bullet

    A63 Junction Box

    Weight: 620g

    Dimension: 134*127*40mm

    Installation Environment: For the containing of electrical connections which need to be concealed from sight and deter tampering

    Applicable Model: Mini Bullet, Motorized Mini Bullet, Vandal-proof Motorized Mini Bullet

    Please contact us for prices

     

    A62 Junction Box Weight: 510g Dimension: 134*127*40mm Installation Environment: For the contai
    Quick View
  • Milesight

    Milesight MS-A71 Wallmount Bracket for mini domes

    0 out of 5

    A71 Wall Mount

    Weight: 530g

    Dimension: 162*124*78mm

    Installation Environment: Used to install cameras on an wall or vertical structure

    Applicable Models: Mini Dome, IR Mini Dome, Vandal-proof Mini Dome, Weather-proof Mini Dome, AF Motorized Mini Dome

    Please contact us for prices

     

    A71 Wall Mount Weight: 530g Dimension: 162*124*78mm Installation Environment: Used to install
    Quick View
  • RECORDING HARD DISK DRIVES FOR NETWORK VIDEO RECORDER

    0 out of 5

    Surveillance hard drives are a central component in the recording and storage of surveillance video, they are designed to work 24 hours a day & 7 days week.

    The number of drives and  the maximum recording capacity permitted for each NVR  depends on the models, Please check the NVR datasheets to confirm the same.

    The below table shows the NVR models we sell with the corresponding number of drives supported and maximum data capacity permitted on each drive .

    MS N1009 – Supports 1 x HDD  (maximum data capacity of each drive upto 10 TB )

    MS N5000 – Supports 2 x HDD  (maximum data capacity of each drive upto 10 TB )

    Uniview NVR 301 – Supports 1 x HDD (maximum data capacity of each drive upto 8 TB )

    Uniview NVR 302 – Supports 2 x HDD (maximum data capacity of each drive upto 10 TB )

    Zavio NQ Series – Supports 2 x HDD (maximum data capacity of each drive 6 TB )

     

    Surveillance hard drives are a central component in the recording and storage of surveillance video, th
    Quick View
  • Teltonika RUT240 Compact Industrial 3G/4G LTE Router with Wi-Fi

    0 out of 5
    • Supports Telstra 4GX 700 MHz LTE with full Next-G fallback
    • Supports Optus 4G+ 700 MHz LTE with full 3G fallback
    • Supports Vodafone 4G+ 850 MHz LTE with full 3G fallback
    • 1x LAN, 1x WAN 10/100 Ethernet Ports
    • 2.4 GHz 802.11n WiFi 2X2 MIMO
    • 9 to 30 Vdc Molex connector with 240 Vac power supply
    • Can be powered by 24 Vdc Passive PoE Injector
    • Dynamic DNS, DHCP Relay, Web filters
    • 2x Removable Cellular Antennas, 1x WiFi antennas
    • SMS Config & Ping reboot
    • 1 x external SIM holder
    • Telstra.Corp and Private APNs fully functional
    • Now includes mounting flanges as standard
    Supports Telstra 4GX 700 MHz LTE with full Next-G fallback Supports Optus 4G+ 700 MHz LTE with full
    Quick View
  • Tenda

    Tenda -TEF1105P-4-63W , 5 Port Fast Ethernet Switch with 4 PoE ports

    0 out of 5

    Fast Ethernet PoE switch comes with 4  PoE ports + 1 uplink port. The switch enables users to use all the PoE ports to connect PoE powered devices without wasting any PoE ports for uplink.

    • Auto Detects Powered Devices
    • Plug and Play no configuration required
    • 802.3af / at  PoE power compliant
    • IEEE 802.3af /at power on up to 4 ports
    • 4 x 10/100 Mbps PoE Ports + 1 uplink port
    • Supports PoE power up to 30W for each PoE port
    • 6KV lightning protection
    • Upto 250 meters long distance transmission
    • LED indicators for monitoring power, link, activity and speed
    • Desktop metal case with 63W external power supply

     

     

     

    Fast Ethernet PoE switch comes with 4  PoE ports + 1 uplink port. The switch enables users to use all
    Quick View
  • Tenda

    Tenda PoE 30G-AT, Gigabit PoE injector delivers 30W power upto 100 meters

    0 out of 5
    • Delivers Power upto 100 meters
    • Gigabit for blazing fast data transfer
    • Fully IEEE 802.3 at / af compliant
    • Plug and Play, no configuration required
    • Easy and cost effective solution to power PoE devices
    • Reduces installation costs
    Delivers Power upto 100 meters Gigabit for blazing fast data transfer Fully IEEE 802.3 at / af co
    Quick View
  • Tenda

    TENDA PoE15F – 10/100Mbps POE INJECTOR

    0 out of 5
    • Delivers Power upto 100 meters
    • Fully IEEE 802.3 af compliant
    • Plug and Play, no configuration required
    • Easy and cost effective solution to power PoE devices
    • Reduces installation costs

     

     

    Delivers Power upto 100 meters Fully IEEE 802.3 af compliant Plug and Play, no configuration requ
    Quick View
  • Tenda

    Tenda TEF1109P-8-102W – 9 port Fast Ethernet Switch with 8 PoE ports

    0 out of 5

    Fast Ethernet PoE switch comes with 8  PoE ports + 1 uplink port. The switch enables users to use all the PoE ports to connect PoE powered devices without wasting any PoE ports for uplink.

    • Auto Detects Powered Devices
    • Plug and Play no configuration required
    • 802.3af / at  PoE power compliant
    • IEEE 802.3af /at power on up to 8 ports
    • 8 x 10/100 Mbps PoE Ports + 1 uplink port
    • Supports PoE power up to 30W for each PoE port
    • 6KV lightning protection
    • Supports Simple Port VLAN setup
    • Smart Power Management
    • LED indicators for monitoring power, link, activity and speed
    • Large Buffer design for smooth performance
    • Desktop metal case with 102W external power supply

     

    Fast Ethernet PoE switch comes with 8  PoE ports + 1 uplink port. The switch enables users to use all
    Quick View
  • WALL MOUNT BRACKET FOR ZAVIO D8220 /D8520 DOME

    0 out of 5

    Dome wall mount bracket with rubber CI-817

    • Dimension : 200 x 127 mm
    • Supports Models :  Zavio D8220 and D8520
    Dome wall mount bracket with rubber CI-817 Dimension : 200 x 127 mm Supports Models :  Zavio 
    Quick View
X