Phone System Accessories

Showing all 12 results

  • Yeastar

    3G / CELLULAR VOIP GATEWAYS WITH MULTI CHANNEL OPTIONS

    0 out of 5

    TG series of VoIP GSM/CDMA/UMTS gateways connect GSM/CDMA/UMTS Network to VoIP Network to support two-way communication and fallback option when landlines go down.

    • Cost saving  -Save phone bills with mobile-to-mobile calls and SIP trunks
    • Easy to install –  can be easily set up in the Web based management interface
    • Back up  – cost-effective backup when the landline network goes down
    • Easy to integrate -High compatibility with major IP-PBX and softswitch brands

    TG series VoIP / 3G gateways come in 1 /2 / 4 / 8  16/  SIM card configurations, please select from the options below

    TG series of VoIP GSM/CDMA/UMTS gateways connect GSM/CDMA/UMTS Network to VoIP Network to support two-w
    Quick View
  • AC/DC Power Supply Adapter

    0 out of 5
    • Input 100-240V AC
    • Output 12V DC  1000mA
    • Regulated output voltage for Intercoms, Phones, Speakers, CCTV etc.

     

    Input 100-240V AC Output 12V DC  1000mA Regulated output voltage for Intercoms, Phones, Speakers
    Quick View
  • Cisco SPA112 – 2 Port Analog Telephone Adapter

    0 out of 5

    Connect your existing analog phone to VoIP / NBN network

    • Advanced voice (QoS) capabilities and the voice Session Initiation Protocol (SIP) stack
    • Faxing with simultaneous voice and data use
    • 2 x standard telephone ports with an independent phone number
    • Compatible with all industry voice and data standards such as caller ID, call waiting, and voicemail

     

    Connect your existing analog phone to VoIP / NBN network Advanced voice (QoS) capabilities and the
    Quick View
  • Doorbird

    DOORBIRD ETHERNET TO 2 WIRE CONVERTER

    0 out of 5

    The Doorbird 2 wire converter will convert your Ethernets POE signal to be used with a 2 wire system, such as an existing door chime wiring, and convert it back again to allow connection to your Doorbird Intercom.

    Have trouble running a cat 5e or 6 cable to your intercom? Dont have a Wifi signal reliable enough at the Intercom installation location? No problem, utilise your existing electric strike or doorbell wiring to both power and transmit data to your intercom.

    The Converter supports both af and at modes of POE, allowing up to 30w to be used to power all matter of devices, such as cameras and intercoms.

    Note: POE injector/switch is not included or part of this product.

    The Doorbird 2 wire converter will convert your Ethernets POE signal to be used with a 2 wire system, s
    Quick View
  • Grandstream

    Grandstream HT801 NBN Ready Analog to VoIP converter.

    0 out of 5

    Designed for users looking to connect their analog devices to NBN /VoIP network at home or in the office. The HT801 is a powerful analog telephone adapter that is easily deployable and manageable.

    • Supports connection of 1 Analog Device
    • Supports 3 Way voice conference
    • Supports Call Forward, Call Waiting,  Message Waiting Indication.
    • TLS and SRTP security encryption technology to protect calls and accounts
    • Supports T.38 Fax Over IP
    • Supports wide range of Caller ID Formats
    • Failover SIP server automatically switches to secondary server if main server loses connection

     

    Designed for users looking to connect their analog devices to NBN /VoIP network at home or in the offic
    Quick View
  • Grandstream

    Grandstream HT802 NBN Ready Analog to VoIP converter.

    0 out of 5

    Designed for users looking to connect their analog devices to NBN /VoIP network at home or in the office. The HT802 is a powerful analog telephone adapter that is easily deployable and manageable.

    • Supports connection of 2 Analog Devices
    • Supports 3 Way voice conference
    • Supports Call Forward, Call Waiting,  Message Waiting Indication.
    • TLS and SRTP security encryption technology to protect calls and accounts
    • Supports T.38 Fax Over IP
    • Supports wide range of Caller ID Formats
    • Failover SIP server automatically switches to secondary server if main server loses connection

     

    Designed for users looking to connect their analog devices to NBN /VoIP network at home or in the offic
    Quick View
  • Tenda

    Tenda -TEF1105P-4-63W , 5 Port Fast Ethernet Switch with 4 PoE ports

    0 out of 5

    Fast Ethernet PoE switch comes with 4  PoE ports + 1 uplink port. The switch enables users to use all the PoE ports to connect PoE powered devices without wasting any PoE ports for uplink.

    • Auto Detects Powered Devices
    • Plug and Play no configuration required
    • 802.3af / at  PoE power compliant
    • IEEE 802.3af /at power on up to 4 ports
    • 4 x 10/100 Mbps PoE Ports + 1 uplink port
    • Supports PoE power up to 30W for each PoE port
    • 6KV lightning protection
    • Upto 250 meters long distance transmission
    • LED indicators for monitoring power, link, activity and speed
    • Desktop metal case with 63W external power supply

     

     

     

    Fast Ethernet PoE switch comes with 4  PoE ports + 1 uplink port. The switch enables users to use all
    Quick View
  • Tenda

    Tenda PoE 30G-AT, Gigabit PoE injector delivers 30W power upto 100 meters

    0 out of 5
    • Delivers Power upto 100 meters
    • Gigabit for blazing fast data transfer
    • Fully IEEE 802.3 at / af compliant
    • Plug and Play, no configuration required
    • Easy and cost effective solution to power PoE devices
    • Reduces installation costs
    Delivers Power upto 100 meters Gigabit for blazing fast data transfer Fully IEEE 802.3 at / af co
    Quick View
  • Tenda

    TENDA PoE15F – 10/100Mbps POE INJECTOR

    0 out of 5
    • Delivers Power upto 100 meters
    • Fully IEEE 802.3 af compliant
    • Plug and Play, no configuration required
    • Easy and cost effective solution to power PoE devices
    • Reduces installation costs

     

     

    Delivers Power upto 100 meters Fully IEEE 802.3 af compliant Plug and Play, no configuration requ
    Quick View
  • Tenda

    Tenda TEF1109P-8-102W – 9 port Fast Ethernet Switch with 8 PoE ports

    0 out of 5

    Fast Ethernet PoE switch comes with 8  PoE ports + 1 uplink port. The switch enables users to use all the PoE ports to connect PoE powered devices without wasting any PoE ports for uplink.

    • Auto Detects Powered Devices
    • Plug and Play no configuration required
    • 802.3af / at  PoE power compliant
    • IEEE 802.3af /at power on up to 8 ports
    • 8 x 10/100 Mbps PoE Ports + 1 uplink port
    • Supports PoE power up to 30W for each PoE port
    • 6KV lightning protection
    • Supports Simple Port VLAN setup
    • Smart Power Management
    • LED indicators for monitoring power, link, activity and speed
    • Large Buffer design for smooth performance
    • Desktop metal case with 102W external power supply

     

    Fast Ethernet PoE switch comes with 8  PoE ports + 1 uplink port. The switch enables users to use all
    Quick View
  • Fanvil

    WF20 USB Wi-Fi dongle

    0 out of 5

    Highlights

    – Compatible with Fanvil X5S/X6/X7/X7C/X210/X210i (Only support 2.4GHz/150Mbps)
    – For X5S/X6/X210/X210i, upgrade to the version of V1.10.10 or higher
    – For X7/X7C, upgrade to the version of V1.0.10 or higher
    – WF20 is compliant with the IEEE802.11n, IEEE802.11b/g, and 802.11ac standards, maximizing reliability and throughput.
    – Ease-of-use
    – High Transmission Rate
    – Plug and Play
    – Lower Power Consumption

    Highlights - Compatible with Fanvil X5S/X6/X7/X7C/X210/X210i (Only support 2.4GHz/150Mbps) - For X5
    Quick View
  • Yeastar

    YEASTAR S SERIES TRUNK & EXTENSION MODULES

    0 out of 5

    S2 Module – plugin module for integrating analog extension devices like cordless phones, fax machines, Eftpos etc. Each module comes with 2 ports for 2 analog devices.

    O2 Module plugin module for integrating PSTN trunks, each module comes with 2 PSTN ports capable of supporting 2 PSTN lines.

    SO Module – plugin module for integrating 1 x PSTN trunk and 1 x Analog Extension, the module comes with 1 PSTN port and 1 Analog extension port.

    B2 Module –  plugin module with  2 x NT/TE BRI Ports for ISDN BRI lines.

    3G UMTS Module – plugin module for 1 Channel for WCDMA  Frequency: 900/2100 MHz, 850/2100 MHz, 850/1900 MHz

    4G LTE Module – plugin module provides 4G cellular data on SIM card, making the 4G LTE become the primary Internet connection.

    Please select the required modules from below drop-down menu.

     

    S2 Module - plugin module for integrating analog extension devices like cordless phones, fax machines,
    Quick View
X